This is a frequency agile leakage detector (109.25 - 110.5 MHz and 118.5 - 147.25 MHz) with ten user selectable presets. The instrument’s features include Searcher Plus GT technology that is compatible with CT-2 or CT-3 channel tagging techniques, measurement range from 2 - 2000 μV/m, numeric readout, and tone proportional to signal strength.
REQUIRES SEEKER SETUP SOFTWARE FOR ADVANCED CONFIGURATION.
MCA Module with Hardwired Serial Data Connection to GPS receiver.
MCA Module with Hardwired Serial Data Connection to GPS receiver and WiFi Option to allow direct upload of leakage data from your vehicle to the LAW software through a properly configured wireless site, see the Seeker Approved A/B/G WiFi Access Point below. Includes WiFi antenna with 12’ coaxial cable for remote mounting.
Garmin GPS Receiver. RS-232 Interface.
Commercial-grade WiFi access point that ensures optimum data upload range and connection reliability.
International power adaptor kit for the Seeker Lite, Seeker Lite² & Seeker Leakage Detectors that includes power adaptors for the UK, Europe and Australia. The Seeker Lite, Seeker LIte² or Seeker Charger is required to use this kit.
Vehicle power adaptor for the Seeker. The Vehicle Power Adaptor (CL-9) is not needed if using the Seeker Mobile Mount (SMB-2) and the Mobile Mount Power Cable that is included with the Seeker.
Holster used to protect the Seeker when used out of the Seeker Mobile Mount (SMB-2) that can also be used with the AFS-2 Dipole Antenna that is equipped with a Seeker Pole Mounting Kit.
Mounting kit for securing a Seeker to an AFS-2 Dipole Antenna to provide one-handed operation. Includes Seeker Holster (CC-28).
Calibrated halfwave dipole, 50 Ohm, 3 meter extension pole. Specify single frequency from 108 to 160 MHz.
Permanent mount, vertical quarter wave whip antenna. Specify single frequency from 108 to 118 MHz.
Permanent mount, vertical quarter wave whip antenna. Specify single frequency from 119 to 160 MHz.
Magnetic base, vertical quarter wave whip antenna. Specify single frequency from 108 to 118 MHz.
Magnetic base, vertical quarter wave whip antenna. Specify single frequency from 109.27 - 110.5 MHz and 118.25 - 147.25 MHz.
Passive 50 Ohm near field probe.
Li-ION battery for the Seeker Lite, Seeker Lite², & Seeker Leakage Detectors.
AC to DC power adaptor & battery charger for the Seeker Leakage Detector. Includes the Seeker Mini USB Charge/Data Cable (I/O-20).
DC power cable for the Seeker Mobile Mount (SMB-2) and Seeker BB-2.
Mini USB charge/data cable for the Seeker, Seeker MCA, and Seeker BB-2.
Rubber duck antenna for the Seeker.
Replacement WiFi antenna for WiFi-equipped Seeker GPS MCA Modules (P/N 2011029001 and P/N 2011029005) and Seeker BB-2. Includes 12’ coaxial cable for remote mounting.
Additional mobile mount with vehicle power adaptor for the Seeker & Seeker GPS.
Configures the Seeker and Seeker Lite² Leakage Detectors, enabling operator to assemble files containing Channel Frequencies, Squelch Levels, Audio Volume and other settings. The operator can efficiently download configurations to one or more leakage detectors. The software includes the Seeker & Seeker MCA Mini USB Charge/Data Cable (I/O-20) and Seeker Lite² Data Cable (I/O-17). Includes capability to assemble Seeker GPS leakage data files in a format compatible with the CLT APLAS3i service and to forward the records to the APLAS3i server for analysis and work order generation.
Pre-configured server*, integrating powerful software and hardware to provide a tailored, comprehensive solution for managing the storage and retrieval of leakage information collected by vehiclemounted Seeker GPS systems. Receives data uploads via the Internet through an application running on the technician’s PC or laptop (no charge) or through a configured WiFi wireless site. Data stored in the LAW Server Software is displayed on maps and as text. Work orders can be created and emailed to an assigned technician.
The LAW Integrated Server Package provides the following features and benefits;
Comes pre-configured with LAW Server Software and other required Server Licenses. The Map Subscription for LAW Server Software must be purchased at the time of initial sale. This license provides the user four automatic map updates per year and must be renewed yearly.
* Specially configured Dell 2U rack mounted Server includes OEM Next Business Day Parts and Labor On-Site Response Warranty – 3 years from DELL®. Compatible with standard PS/2 keyboard and mouse. A second power supply is available from Dell to provide redundancy and extra reliability. A backup storage system is recommended for prevention of data loss.
This is a hardware expansion license for the LAW Integrated Server Package beyond the initial 250 licenses that are included at the time of initial purchase. This package includes licenses for an additional 25 Seeker, Seeker MCA or Seeker BB-2 Units. Each Seeker, Seeker MCA or Seeker BB-2 that uploads data to LAW is considered to be one device.
The hardware expansion license can be purchased with the LAW Integrated Server Package at the time of sale or aftermarket.
Offered as an alternative to installing and maintaining expensive server equipment and relying on IT personnel focused on other tasks, Trilithic's Network Services group hosts all of the required hardware, software, security and support, allowing you to build and operate a high-quality broadband network at a lower total cost.
QUANTITY DISCOUNTING AVAILABLE for monthly rates based on the number of Seekers in your system, contact Trilithic Sales for more information.
For new purchases, you must include LAW Hosted Services Setup & LAW Map License.
This is a one-time set up fee for LAW Hosted Services. This does not include the LAW Map License or Monthly Subscription.
This is a one year subscription and/or license renewal for the LAW Map License. The subscription provides four automatic map updates per year and is necessary for the operation of the LAW Server Software.
The LAW Map License must be purchased with new copies of the LAW Server Software at the time of initial sale and must be renewed yearly. This LAW Map License can also be purchased as a yearly renewal license to an existing LAW Server.
Trilithic’s new Seeker BB-2 automatic leakage detection system is a fully automated, GPS-based leakage detection system that operates in the background while techs drive their routes, without any operator interaction. You can just install it and forget it.
Hides a distinctive marker signal in the system video carrier used for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas.
The CT-2 comes with standard tagging frequencies of 3 Hz and 20 Hz. The 20 Hz tagging frequency is adjustable between 10 Hz and 23 Hz. When ordering, specify your desired tagging frequency. Only one CT-2 is needed per head-end.
This CE Approved version of the CT-2 hides a distinctive marker signal in the system video carrier used for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas.
Provides a narrow band, AM modulated carrier that is “tagged” for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas.
When ordering, specify the AM modulated carrier frequency from 108 Mhz to 157 MHz. The CT-3 comes with standard tagging frequencies of 3 Hz and 20 Hz. The 20 Hz tagging frequency is adjustable between 10 Hz and 23 Hz. When ordering, specify your desired tagging frequency. Only one CT-3 is needed per head-end.
This CE Approved version of the CT-3 provides a narrow band, AM modulated carrier that is “tagged” for leakage testing, making it easy to identify the source of signal leakage in “overbuilt” areas.
Currently, the following products are in your quote:
